Nodes
      Back to home
      1. Mingo Help Center
      2. Hardware Install Documentation
      3. Nodes

      Configure a TL70 into a Counter

      Tutorial on how to configure the TL70 into a counter.

      Process

      It is recommended to turn the power off the TL70 for easier access to the DIP Switch.

      1. Twist the top of the TL70 in order to align the two lines. This action will allow you to take the top of the TL70 off. 
      2. Turn the third DIP switch on. A screwdriver is recommended if you cannot do it with your fingers. 

      3. Place the lid on top of the TL70. 

      It is recommended to remove power to the TL70 when the process is completed. 

      Video

      Additional Information