How to Install the Starter Kit

Description goes here

1. Make sure the gateway is powered on and in the area it will be installed.
2. Open the lid of the sensor and triple-click the black button. LED lights should power on.
3. Look for the green LED before mounting to ensure it has a strong signal.
4. Mount the sensor in a place where it will see part individually.
5. Verify that the yellow LED goes off when a part goes by and stays lit when a part is not visible.
6. Record a video and send it to SensrTrx.
7. SensrTrx will confirm the device is powered and able to communicate with the Gateway device.
8. SensrTrx will confirm the data appears to be counting as it should.
9. Validate the counts we are receiving are correct.